Mast water technology mainly focuses on providing water softening solutions to the modern household. The water that comes from the sea and mostly all the urban sources is hard and needs to be softened. That is why the water softening equipment is seriously appreciated in the urban dwellings where hard water is a serious issue.
Hard water is water with an extremely strong salt concentration that is not easy to remove through regular filtration. As seawater has a strong salt concentration, the water that is used from sea-based sources is high in salt concentration and will need to be softened.
Hard Water Issues:
Hard water is hazardous water for everyday use in many ways. The salt deposits in the pipes and will also build scales in the hair. It makes human skin dry and cleaning appliances and utensils with hard water reduce their lifespan. The reason is that the strong concentration of salt makes the water chemistry not good for everyday use.
The process of water softening takes the enormous amount of salt out of the waste water treatment so that it stops salt shedding throughout the use. The process is mainly ion exchange because salt is a combination of negative and positive ions. If you break the ionic bond then the salt will deposit in the softening machine and the water will come with a considerably reduced salt concentration in the water.
The water is mainly pushed through resin beads that are made of polystyrene and are charged with sodium ions. The sodium is the positive charge while the beads themselves are negatively charged. The negative ions will connect with the positive charge of salt and vice versa, the salt in the water is left with resin beads and the water that comes out has a considerably lower amount of salt in it.
The machine looks like a long cylinder and if a person lives close to the sea, then it is a small investment for a healthier quality of life.
The machine and its apparatus are extremely easy to maintain, the beads and inexpensive and cleaning is not required in months.
But this simple device will make the water good for your skin, your hair, your food, and all other factors that are a part of everyday life. So go get one for your family this Christmas for use this type of services visit our website invwater.com
There are many characteristics of pure water that we tend to see being advertised on television. But how many of them are actually important or even healthy for you as a human being? Here are a few of the facts that we all hear about water on television and the real opinions we have on these facts.
We all have seen a water bottle with a lake on it. The main idea purified water treatment is that a water source near the mountains have water with miraculous qualities. In modern life that could not be farther than the truth. The truth is that the water that is obtained from lakes is stagnant and came from the glaciers and that water is not healthy at all.
Have you ever seen any of the tourists drink water purified process from the lake? Have any of them ever tried to store the water and take it back home? No, that is because the lake water stays stagnant forever. Lakes do not fill and dry up, they simply stay. The water is not hazardous but it is not super clean either.
The Miraculous Mountain Water:
Another weird myth that comes from God knows where is that mountain water is better for humans than the seawater. The seas are massive and they keep sloshing around in themselves, so fresh water comes to the shore all the time. It’s not ideal and definitely not drinkable but glaciers, unless they are in Alaska, are no better than your ordinary water source and they certainly do not have any miraculous qualities.
Now the question becomes, where does these myths come from? Well, the mineral content in the water is pretty important in the mineral water bottle. There is an automatic assumption that seawater is hard and it does not have minerals and the land water has stronger mineral content.
The truth is that this is just a pointless and completely fabricated presumption. Seawater is high mineral content as well and desalination of seawater makes it a very high-quality water source.
All in all, let’s fight the unhealthy culture of letting myths drive promotional campaigns,wastewater treatment and accept that mineral water from lakes or mountains is not considered anymore healthier than your standard seawater source.
Check out various water filtration processes in our blogs.
The high-pressure water jet is a great way to make sure that theindustrial cleaning processes that are ongoing will be successfully completed. But the fact is that high-pressure water jet is a great way to clean many of the usual outdoor spots as well. Here we are listing a few of the main ways that high-pressure water jet can work as an effective cleaning method.
If you have a warehouse with an extensive amount of debris, then clean out the dust but afterward, just put the high-pressure water injection to good use and it will push out all the excess dirt into the center. The system is short, simple and inexpensive. The alternative is to get a gallon of surf and higher a small army of staff to clean out the warehouse corners and nooks and crannies manually.
Whether it’s a domestic parking lot or the parking lot of an office, the monthly cleaning of these areas is a pain in the neck. They have a ton of oil stains and other issues that are hard to deal with. The simple solution is the high-pressure water jet propelling system that will work on the oil stains and other deep marks that you may have a hard time clearing out with detergents. They are a simple solution to a lot of complex marks that, in any other case, would require extensive manpower and work.
Water jets are regularly used in car cleaning already. Of course, the propulsion is lower in these cases. The water propelled in these cases is in a much lower intensity and will need a lighter pressure. A full-on pressure in the industrial-grade water propulsion is exceptionally high and it will most probably wreck the car. But if we keep the pressure to a reasonable level, then the water can be a great and simple way to clean out the insides and the bottom of the car. The car will be cleaned quickly and will not require manual labor.
All in all,cleaning technology of high-pressure water injection propulsion is a great way to make sure that the water that is pushed into the system is deep cleaning debris that would otherwise require a lot of detergents and hard work. This is the reason you will find the jet propelling water system to be highly effective.
This product is compound mainly by imidazoline quaternary ammonium salt with some other corrosion additives, surfactants, etc. It has good corrosion resistance, good solubility, low emulsifying tendency and can be used in combination with many other chemical agents. It can inhibit both uniform corrosion and pitting corrosion It is an ideal corrosion inhibitor for water injection system in oil field.
It is suitable for corrosion prevention of sewage treatment and closed water injection system and dissolved pipeline in high mineralization oil field.
||Orange-yellow to reddish brown liquid
|Condensation point ℃ ≤
||Soluble in water
|Corrosion rate，mm/a ≤
The concentration used is usually 50-100 PPM.
- Package and Storage
200kg plastic lined iron drum or 25kg plastic drum package.
Store in a cool, dry place indoors with a shelf life of one year.