Mast Water Technology: Water Softening Solutions


Image result for Mast Water TechnologyMast water technology mainly focuses on providing water softening solutions to the modern household. The water that comes from the sea and mostly all the urban sources is hard and needs to be softened. That is why the water softening equipment is seriously appreciated in the urban dwellings where hard water is a serious issue. 

Hard water is water with an extremely strong salt concentration that is not easy to remove through regular filtration. As seawater has a strong salt concentration, the water that is used from sea-based sources is high in salt concentration and will need to be softened. 

Hard Water Issues:Image result for hard water issues

Hard water is hazardous water for everyday use in many ways. The salt deposits in the pipes and will also build scales in the hair. It makes human skin dry and cleaning appliances and utensils with hard water reduce their lifespan. The reason is that the strong concentration of salt makes the water chemistry not good for everyday use. 

Water Softening:Image result for water softening
The process of water softening takes the enormous amount of salt out of the waste water treatment so that it stops salt shedding throughout the use. The process is mainly ion exchange because salt is a combination of negative and positive ions. If you break the ionic bond then the salt will deposit in the softening machine and the water will come with a considerably reduced salt concentration in the water. 

Resin Beads:Image result for Resin Beads
The water is mainly pushed through resin beads that are made of polystyrene and are charged with sodium ions. The sodium is the positive charge while the beads themselves are negatively charged. The negative ions will connect with the positive charge of salt and vice versa, the salt in the water is left with resin beads and the water that comes out has a considerably lower amount of salt in it. 

The machine looks like a long cylinder and if a person lives close to the sea, then it is a small investment for a healthier quality of life. 

The machine and its apparatus are extremely easy to maintain, the beads and inexpensive and cleaning is not required in months.


But this simple device will make the water good for your skin, your hair, your food, and all other factors that are a part of everyday life. So go get one for your family this Christmas for use this type of  services visit our website

Pure Water: Characteristics

There are many characteristics of pure water that we tend to see being advertised on television. But how many of them are actually important or even healthy for you as a human being? Here are a few of the facts that we all hear about water on television and the real opinions we have on these facts.

Mineral Water:Image result for mineral water
We all have seen a water bottle with a lake on it. The main idea purified water treatment is that a water source near the mountains have water with miraculous qualities. In modern life that could not be farther than the truth. The truth is that the water that is obtained from lakes is stagnant and came from the glaciers and that water is not healthy at all.

Lake Water:Image result for Lake Water
Have you ever seen any of the tourists drink water purified  process from the lake? Have any of them ever tried to store the water and take it back home? No, that is because the lake water stays stagnant forever. Lakes do not fill and dry up, they simply stay. The water is not hazardous but it is not super clean either.

The Miraculous Mountain Water:Image result for The Miraculous Mountain Water
Another weird myth that comes from God knows where is that mountain water is better for humans than the seawater. The seas are massive and they keep sloshing around in themselves, so fresh water comes to the shore all the time. It’s not ideal and definitely not drinkable but glaciers, unless they are in Alaska, are no better than your ordinary water source and they certainly do not have any miraculous qualities.

The Source:Image result for the source
Now the question becomes, where does these myths come from? Well, the mineral content in the water is pretty important in the mineral water bottle. There is an automatic assumption that seawater is hard and it does not have minerals and the land water has stronger mineral content. 

The truth is that this is just a pointless and completely fabricated presumption. Seawater is high mineral content as well and desalination of seawater makes it a very high-quality water source.

All in all, let’s fight the unhealthy culture of letting myths drive promotional campaigns,wastewater treatment and accept that mineral water from lakes or mountains is not considered anymore healthier than your standard seawater source. 

Check out various water filtration processes in our blogs.

Water Treatment


Based on science development and technology innovation and dedicated to the improvement of water environment, our company is a high-tech environmental protection engineering company specialized in the research and development of water treatment equipment and technology, engineering contracting and the installation as well as the commission of the mechanical and electrical equipment. Besides, our company is the earliest and biggest high-tech environmental protection chemical enterprise dedicated in comprehensively researching and developing the environmental-friendly water treatment agents in China. The company is mainly engaged in the installation, modification as well as improvement of EPC projects regarding to water treatment companies in pakistan in the fields of electric power, industry, chemical industry, food processing, urban life and so forth.

Research and development and introduction and application of foreign top technology

The objective of waste water treatment is to reduce the concentrations of specific pollutants to the level at which the discharge of the effluent will not adversely affect the environment or pose a health threat. Moreover, reduction of these constituents need only be to some required level. Although water can technically be completely purified by distillation and deionization, this is unnecessary and may actually be detrimental to the receiving water. Fish and other organisms cannot survive in deionized or distilled water.

For any given wastewater in a specific location, the degree and type of treatment are variables that require engineering decisions. Often the degree of treatment depends on the assimilative capacity of the receiving water. DO sag curves can indicate how much BOD must be removed from wastewater so that the DO of the receiving water is not depressed too far. The amount of BOD that must be removed is an effluent standard (discussed more fully in Chapter 11) and dictates in large part the type of wastewater treatment required.

Circulating Water Bactericide


Microorganisms in circulating water of power plant bring great harm to cooling water system. It not only affects the effect of heat transfer, but also would lead to corrosion of heat exchanger, in seriously would result in shutdown. Now the plant uses the bactericide to treat with the microbial fouling generally, and a variety of fungicides have been developed. However, the long-term usage of fungicide will make the bacteria appear resistance, which greatly limits the application of such measures. This paper overviewed different resistance mechanisms of Pseudomonas, sulfate-reducing bacteria, iron bacteria and slime forming bacteria in the microbial fouling to bactericide and put forward some solutions.

Benzalkonium Chloride is one of the Quaternary ammonium class of Cationic surfactants, belonging to nonoxidizing biocide. It is widely used as a disinfectant in the Hospital, Livestock and Personal Hygiene sectors

Isothiazolinones is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc..

SDIC is water soluble, it has properties of high effective, instant effective, wide range and safety. SDIC has strong fungicide effect, even at dosage of 20ppm, the fungicide ratio can reach to 99%.

TH-409 is composed of cationic surfactant, penetrating agent and dispersant. TH-409 has the advantages of high efficiency, wide range, sterilization, fungicidal, sludge stripping and cleaning

Circulating Water Scale Inhibitor


An open recycling cooling framework utilizes a similar water over and over to cool procedure gear. Warmth ingested from the procedure must be disseminated to permit reuse of the water. Cooling towers, splash lakes, and evaporative condensers are utilized for this reason.

An open recycling cooling framework utilizes a similar water over and over to cool procedure gear. Warmth ingested from the procedure must be disseminated to permit reuse of the water. Cooling towers, splash lakes, and evaporative condensers are utilized for this reason.

Open recycling cooling frameworks spare a colossal measure of new water contrasted with the elective technique, once-through cooling. The amount of circulating water released to squander is enormously diminished in the open recycling technique, and substance treatment is increasingly practical. In any case, open recycling cooling frameworks are naturally subject to more treatment-related issues than once-through frameworks:

cooling by vanishing builds the broke down solids fixation in the water scale inhibitor , raising erosion and statement propensities

the moderately higher temperatures altogether increment erosion potential

the more drawn out maintenance time and hotter water scale in an open recycling framework increment the inclination for organic development

airborne gases, for example, sulfur dioxide, smelling salts or hydrogen sulfide can be assimilated from the air, causing higher consumption rates

microorganisms, supplements, and potential foulants can likewise be consumed into the water over the pinnacle


Cooling towers are the most well-known technique used to disseminate heat in open recycling cooling frameworks. They are intended to give close air/water contact. Warmth dismissal is basically by vanishing of part of the cooling water. Some reasonable warmth misfortune (direct cooling of the water by the air) likewise happens, yet it is just a minor segment of the all out warmth dismissal.

Sorts of Towers

Cooling towers are arranged by the sort of draft (regular or mechanical) and the course of wind stream (crossflow or counterflow). Mechanical draft towers are additionally subdivided into constrained or instigated draft towers.

Characteristic draft towers. Now and again called “hyperbolic” towers because of the unmistakable shape and capacity of their fireplaces, normal draft towers don’t require fans. They are intended to exploit the thickness contrast between the air entering the pinnacle and the hotter air inside the pinnacle. The warm, clammy air inside the pinnacle has a lower thickness, so it ascends as denser, cool air is attracted at the base of the pinnacle. The tall (up to 500 ft) fireplace is important to actuate sufficient wind stream. Common draft towers can be either counterflow or crossflow plans. The pinnacle imagined is a crossflow model. The fill is outside to the shell framing a ring around the base. In a counterflow model, the fill is inside the shell. In the two models, the vacant stack represents a large portion of the pinnacle tallness.

Mechanical Draft Towers. Mechanical draft towers use fans to move air through the pinnacle. In a constrained draft configuration, fans push air into the base of the pinnacle. Practically all constrained draft towers are counterflow plans. Actuated draft towers have a fan at the top to draw air through the pinnacle. These towers can utilize either crossflow or counterflow air flows and will in general be bigger than constrained draft towers.

Counterflow Towers. In counterflow towers, air moves upward, legitimately restricted to the descending progression of circulation water scale inhibitor . This plan gives great warmth trade in light of the fact that the coolest air contacts the coolest water. Headers and splash spouts are normally used to disperse the water in counterflow towers.

Crossflow Towers. In crossflow towers, wind currents evenly over the descending progression of water. The crossflow configuration gives a simpler way to the air, subsequently expanding the wind stream for a given fan torque. Crossflow towers ordinarily have a gravity feed framework a dissemination deck with uniformly separated metering openings to convey the water technology. Frequently, the deck is secured to hinder green growth development.

Cooling Tower Components

Fill Section. The fill segment is the most significant piece of the pinnacle. Pressing or fill of different kinds is utilized to keep the water appropriated equally and to expand the water surface zone for progressively productive dissipation. Initially, fill comprised of “sprinkle bars” made of redwood or weight treated fir. Sprinkle bars are currently accessible in plastic too. Different sorts of fill incorporate plastic sprinkle network, clay block, and film fill.

Film fill has turned out to be prominent as of late. It comprises of firmly pressed, folded, vertical sheets, which cause the water to stream down through the pinnacle in a dainty film. Film fill is normally made of plastic. Polyvinyl chloride (PVC) is usually utilized for frameworks with a greatest water temperature of 130°F or less. Chlorinated PVC (CPVC) can withstand temperatures to roughly 165°F.

Film fill gives more cooling limit in a given space than sprinkle fill. Sprinkle fill can be in part or completely supplanted with film completely fill of a current cooling tower. In view of the nearby dispersing, film fill is truly helpless to different kinds of affidavit. Calcium carbonate scaling and fouling with suspended solids has happened in certain frameworks. Procedure contaminants, for example, oil and oil, can be immediate foulants and additionally lead to substantial natural development on the fill. Any sort of affidavit can seriously decrease the cooling proficiency of the pinnacle.

Louvers. Louvers. Louvers are utilized to help direct wind current into the pinnacle and limit the measure of windage misfortune (water being sprinkled or smothered the sides of the pinnacle).

Float Eliminators. Float Eliminators. “Float” is a term used to depict beads of water entrained noticeable all around leaving the highest point of the pinnacle. Since float has a similar piece as the flowing water, it ought not be mistaken for vanishing. Float ought to be limited since it squanders water and can cause recoloring on structures and cars at some separation from the pinnacle. Float eliminators unexpectedly alter the course of wind current, giving diffusive power to isolate water from the air. Early float eliminators were made of redwood in a herringbone structure. Present day float eliminators are regularly made of plastic and come in a wide range of shapes. They are more viable in expelling float than the early wood forms, yet cause less weight drop.

Way to deal with Wet Bulb, Cooling Range

Cooling towers are intended to cool water to a specific temperature under a given arrangement of condi-tions. The “wet knob temperature” is the most reduced temperature to which water can be cooled by dissipation. It isn’t commonsense to plan a pinnacle to cool to the wet globule temperature. The contrast between the chilly sump temperature and the wet globule temperature is known as the “approach.” Towers are normally planned with a 7-15°F methodology. The temperature distinction between the hot return water and the chilly sump water is alluded to as the “cooling range” (DT ). Cooling range is generally around 10-25°F however can be as high as 40°F in certain frameworks.